GW5200

• Backup cameras
• Rearview eMirror
• Side view eMirror
• Surround view monitoring
• Car Digital Video Recorder
• Driver monitoring system

• Head up display (HUD)
• 360 camera
• IP surveillance cameras
• Doorbell cameras
• Drone cameras
• Wearable cameras

eWARP® Geometric Processor

• 5th-gen eWARP® geometric processor
• Ultra-wide field of view (FOV) lens distortion correction
• Dynamic Electronic Pan/Tilt/Zoom (ePTZ)
• AutoCAL® digital calibration for extrinsic camera alignment
• Ultra-low latency (typically 1/6th of a frame)

HDR Image Signal Processor

• Dual image sensor support
• Supports dual 2.6MP60 resolution sensors
• High Dynamic Range (HDR) processing
  • 2, 3 & 4 exposure On-Chip combining
  • Motion Compensation with On-Chip Combiner
  • Advanced local tone mapping
• Advanced spatial (2D) noise reduction
• Zone-based statistics for AE and AWB
• Dynamic defect and lens shading correction
• Color Noise Reduction, Purple Fringe Correction
• Defog support

Overlay Graphics

• Blending of up to 8 layers
• Fully independent alpha values across layers and pixels
• Vector Graphics Engine
  • On-the-fly rendering: 1920×1080 at 60fps
  • High quality multi-sampled anti-aliased rendering
• Pre-rendered bitmaps
  • Up to 4096×4096 bitmap resolution
  • 256 colors selectable from 24bpp true color range per layer
  • In-line on-chip de-compression for memory savings

System Features

• CAN 2.0B, CAN FD, 3x I2C, 2x SPI, 2x UART, 15x GPIO, 3x PWM, JTAG, eFuse

I/O Interfaces

• Input: 2x MIPI CSI-2 4-lane @ 1.5Gbps/lane
• Output: 1x or 2x MIPI CSI-2 4-lane @1.5Gbps/lane
• Input: 16-bit parallel @ 150MHz
• Output: 16-bit parallel @ 150MHz
• Note: Parallel input and output not supported together

Automotive Safety

• ISO26262 Safety Element out of Context (SEooC) – ASIL B
• System health monitoring, status reporting, and Safe State
• ECC support for all processor code spaces
• Interface support for error detection and correction modes
• Embedded video and system statistics in output stream
• Voltage and temperature sensors, watch dog timer

Electrical Specifications

• Supply voltages:
  • Core: 0.9V ±5%
  • PLL and MIPI: 1.8V ±5%
  • I/O: 1.8V or 2.5V or 3.3V ±5%
• Power:
• Automotive: AEC Q100 Grade 2 (-40°C to 105°C)
• Industrial: -40°C to 85°C

Package

• 169-ball TFBGA 7mm x 7mm, 0.50mm pitch (GW5200 – 1x MIPI output)
• 196-ball TFBGA 10mm x 10mm, 0.65mm pitch (GW5210 – 2x MIPI output)
• RoHS/Lead-Free